Tuton Sistem 1

Tuton System 1

Vertical Pole

Horizontal Pole

Platform Locks

Diagonal Transverse

Cantilevers

Ladders

Kick Boards

Platforms

Vertical Pole

STEEL VERTICAL PIPE
With compressed pipe fittings

Product Description
Steel pipes are 48.3×3.20 mm thick and galvanized using hot dip galvanizing method. Four small holes in each perforated disk allow right angle connections and four large holes allow connections at any angle. Drilled disks are for up to 8 connections with a distance of 0.50 m.

Length (m)	Weight (Kg)	Product Code
0,50	3,20	S1-G4-050
1,00	5,50	S1-G4-100
1,50	7,80	S1-G4-150
2,00	10,20	S1-G4-200
2,50	12,20	S1-G4-250
3,00	14,60	S1-G4-300
4,00	19,10	S1-G4-400

ALUMINUM VERTICAL POLE
With compressed pipe fittings

Length (m)	Weight (Kg)	Product Code
0,50	1,40	S1-A4-050
1,00	2,20	S1-A4-100
1,50	3,20	S1-A4-150
2,00	4,10	S1-A4-200
2,50	5,00	S1-A4-250
3,00	5,90	S1-A4-300
4,00	7,70	S1-A4-400

STEEL VERTICAL PIPE
WITHOUT DIRECT CONNECTION

Product Description
Steel pipes are 48.3×3.20 mm thick and galvanized using hot dip
galvanizing method. Four small holes in each perforated disk allow right angle connections and four large holes allow connections at any angle. Drilled disks are for up to 8 connections with a distance of 0.50 m. Can be used with external pipe connection. Suspended scaffolding is the most suitable solution.

Length (m)	Weight (Kg)	Product Code
0,50	2,50	S1-G4.1-050
1,00	4,60	S1-G4.1-100
1,50	6,80	S1-G4.1-150
2,00	9,00	S1-G4.1-200
2,50	11,70	S1-G4.1-250
3,00	13,70	S1-G4.1-300
4,00	18,10	S1-G4.1-400

ALUMINUM VERTICAL PIPE
WITHOUT DIRECT CONNECTION

Product Description
Made of aluminum pipe. Four small holes in each perforated disk allow right angle connections and four large holes allow connections at any angle. Drilled disks are for up to 8 connections with a distance of 0.50 m. Can be used with external pipe connection. Suspended scaffolding is the most suitable solution.

Length (m)	Weight (Kg)	Product Code
0,50	1,20	S1-A4.1-050
1,00	1,90	S1-A4.1-100
1,50	2,80	S1-A4.1-150
2,00	3,80	S1-A4.1-200
2,50	4,70	S1-A4.1-250
3,00	5,60	S1-A4.1-300
4,00	7,50	S1-A4.1-400

STARTER PART

Product Description
The drilled disk forms the scaffolding footing together with the foundation plates. The vertical pole is placed on the starter part for further installation.

Length (m)	Weight (Kg)	Product Code
0,24	1,40	S1-G19-024
0,43	2,20	S1-G19-043

PIPE CONNECTION PART

Product Description
Used for screwing to the pole without pipe connection.

Length (m)	Weight (Kg)	Product Code
0,52	1,60	S1-G29-052

Horizontal Pole

STEEL HORIZONTAL MEMBER

Product Description
The steel is hot dip galvanized. The pipe support is installed as a platform carrier, railing and supporting element of the bases.

Length (m)	Weight (Kg)	Product Code
0,25	1,40	S1-G7-025
0,39	1,80	S1-G7-039
0,45	2,00	S1-G7-045
0,50	2,20	S1-G7-050
0,73	3,00	S1-G7-073
0,90	3,50	S1-G7-090
1,00	3,80	S1-G7-100
1,04	4,00	S1-G7-104
1,07	4,10	S1-G7-107
1,09	4,20	S1-G7-109
1,29	4,80	S1-G7-129
1,40	5,00	S1-G7-140
1,50	5,40	S1-G7-150
1,57	5,60	S1-G7-157
2,00	7,00	S1-G7-200
2,07	7,20	S1-G7-207
2,50	8,50	S1-G7-250
2,57	8,70	S1-G7-257
3,00	10,20	S1-G7-300
3,07	10,50	S1-G7-307
4,14	14,00	S1-G7-414

ALUMINUM HORIZONTAL ELEMENT

Product Description
The aluminum pipe support is mounted as a platform carrier, railing and support for the bases

Length (m)	Weight (Kg)	Product Code
0,73	2,80	S1-A7-073
1,90	3,50	S1-A7-090
1,04	3,70	S1-A7-104
1,57	4,00	S1-A7-157
2,07	4,50	S1-A7-207
2,57	4,90	S1-A7-257
3,07	5,50	S1-A7-307

REINFORCED HORIZONTAL MEMBER

Product Description
The steel is hot dip galvanized. For supporting bases and pipe support for larger loads.

Length (m)	Weight (Kg)	Product Code
1,09	6,90	S1-G25-073
1,29	7,80	S1-G25-129

DOUBLE REINFORCED HORIZONTAL MEMBER

Product Description
The steel is hot dip galvanized. Used in combination with the supporting sub-bearing to accommodate pipe supported bases for large loads.

Length (m)	Weight (Kg)	Product Code
1,57	9,90	S1-G11-157
2,07	13,20	S1-G11-207
2,57	16,50	S1-G11-257
3,00	19,40	S1-G11-300
3,07	19,70	S1-G11-307

Platform Locks

EDGE INTERMEDIATE PLATFORM LOCK

Product Description
The steel is hot dip galvanized. For short bases at the edges as an intermediate support member.
It is pushed onto the steel bases on one side and inserted longitudinally into the lock on the other side.

Length (m)	Weight (Kg)	Product Code
0,32	2,00	S1-G31-032
0,64	4,40	S1-G31-064
1,96	5,50	S1-G31-096

INTERMEDIATE PLATFORM LOCK MIDDLE

Product Description
Steel is galvanized by the hot-dip method. For shorter bases
as an intermediate support in the middle. It is pushed onto the steel bases from both sides

Length (m)	Weight (Kg)	Product Code
0,32	3,10	S1-G30-032
0,70	4,20	S1-G30-070
1,09	5,20	S1-G30-109

Diagonal Transverse

VERTICAL DIAGONAL TRANSVERSE
Area Height 0.50 m

Product Description
Galvanized with the hot dip method.
For additional support of locks and posts.

Length (m)	Width (m)	Weight (Kg)	Product Code
1,09	1,10	4,00	S1-G22-050/109
1,57	1,55	5,70	S1-G22-050/157
2,07	2,03	7,20	S1-G22-050/207
2,57	2,51	8,40	S1-G22-050/257
3,07	3,00	9,60	S1-G22-050/307

VERTICAL DIAGONAL TRANSVERSE
Area Height 1.00 m

Product Description
Galvanized with the hot dip method.
For additional support of locks and posts.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	1,20	4,20	S12621-073
1,09	1,41	4,80	S12621-109
1,57	1,79	6,30	S12621-157
2,07	2,20	7,40	S12621-207
2,57	2,66	8,80	S12621-257
3,07	3,13	9,90	S12621-307

VERTICAL DIAGONAL TRANSVERSE
Area Height 1.50 m

Product Description
The steel is hot dip galvanized. For additional support of locks and posts.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	1,65	5,40	S1-G22-100/073
1,09	1,81	5,80	S1-G22-100/109
1,57	2,11	7,30	S1-G22-100/157
2,07	2,48	8,20	S1-G22-100/207
2,57	2,89	9,50	S1-G22-100/257
3,07	3,32	10,50	S1-G22-100/307

VERTICAL DIAGONAL TRANSVERSE
Area Height 1.50 m

Product Description
The steel is hot dip galvanized. For additional support of locks and posts.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	2,12	8,20	S1-G22-200/073
1,04	2,23	8,50	S1-G22-200/104
1,09	2,25	8,60	S1-G22-200/109
1,29	2,85	8,90	S1-G22-200/129
1,40	2,40	9,00	S1-G22-200/140
1,57	2,49	9,40	S1-G22-200/157
2,07	2,81	10,00	S1-G22-200/207
2,50	3,15	11,60	S1-G22-200/250
2,57	3,18	12,00	S1-G22-200/257
3,07	3,58	13,00	S1-G22-200/307
4,14	4,51	15,00	S1-G22-200/414

HORIZONTAL DIAGONAL TRANSVERSE
Area Height 1.00 m

Product Description
The steel is hot dip galvanized. For additional support of locks and posts.

Length (m)	Width (m)	Weight (Kg)	Product Code
1,57	1,09	6,20	S1-G23-157/109
1,57	1,57	8,70	S1-G23-157/157
2,00	2,00	11,30	S1-G23-157/200
2,07	0,73	9,00	S1-G23-157/073
2,07	1,09	9,20	S1-G23-157/109
2,07	2,07	11,50	S1-G23-157/207
2,57	0,73	10,80	S1-G23-157/073
2,57	1,09	12,00	S1-G23-157/109
2,57	2,27	14,00	S1-G23-157/257
3,07	0,73	12,30	S1-G23-157/073
3,07	1,09	11,00	S1-G23-157/109
3,07	3,07	15,80	S1-G23-157/307

Cantilevers

O PIPE CANTILEVER

Product Description
The steel is hot dip galvanized. Used to extend the scaffold inwards and outwards with the pipe fitting.

Length (m)	Weight (Kg)	Product Code
0,39	3,90	S1-G9-039
0,69	6,70	S1-G9-069
0,73	6,80	S1-G9-073

STEEL HEAVY LOAD BEARING TRUSS

Product Description
The steel is hot-dip galvanized. It is a carrier for special constructions with high load-bearing capacity or for large span distances.

Length (m)	Width (m)	Weight (Kg)	Product Code
1,00	0,50	12,30	S1-G26-100
1,50	0,50	16,20	S1-G26-150
2,00	0,50	21,20	S1-G26-200
2,07	0,50	22,00	S1-G26-207
2,50	0,50	26,20	S1-G26-250
3,07	0,50	31,80	S1-G26-307
4,14	0,50	39,60	S1-G26-414
5,00	0,50	45,00	S1-G26-500
5,14	0,50	47,70	S1-G26-514
6,14	0,50	57,60	S1-G26-614
7,71	0,50	74,00	S1-G26-771

ALUMINUM HEAVY LOAD BEARING TRUSS

Product Description
Aluminum 48.3×4 mm pipe. Transition carrier for special constructions with high load carrying capacity or for large span distances. The truss made of aluminum is very light and practical compared to the STEEL truss.

Length (m)	Width (m)	Weight (Kg)	Product Code
2,07	0,50	14,00	S1-A26-207
2,57	0,50	16,00	S1-A26-257
3,07	0,50	18,00	S1-A26-307
4,14	0,50	22,00	S1-A26-414
5,14	0,50	27,00	S1-A26-514
6,14	0,50	31,00	S13206-614
7,71	0,50	36,00	S1-A26-771

Ladders

STAIR RAILING

Product Description
Galvanized by hot dipping method. Stair railing holder with special lock system.

Length (m)	Width (m)	Weight (Kg)	Product Code
2,57	18,10	18,00	S1-G13.1-200/257
3,07	20,10	21,00	S1-G13.1-200/307

INTERIOR STAIR RAILING

Product Description
Galvanized by hot dipping method. Stair railing holder with special locking system is secured and used on the staircase with the special locking design of the inner railing.

Length (m)	Width (m)	Weight (Kg)	Product Code
2,57	1,21	12,10	S1-G13.2-200/257
3,07	1,41	14,10	S1-G13.2-200/307

ALUMINUM LADDER WITH PEDESTAL

Product Description
The 2.00 m site height provides comfortable external transportation during intensive scaffolding use and handling of bulky materials.

Load Class	Length (m)	Width (m)	Weight (Kg)	Product Code
2,57	3,25	0,64	24,80	S4-A17.2-257
3,07	3,65	0,64	30,00	S4-A17.2-307

Kick Boards

WOODEN KICK GUARD

Product Description
The kick plate completes the threepart side guard foreseen.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	0,15	2,50	S1-A15.1-073
1,09	0,15	3,50	S1-A15.1-109
1,40	0,15	4,40	S1-A15.1-140
1,57	0,15	4,50	S1-A15.1-157
2,07	0,15	5,30	S1-A15.1-207
2,57	0,15	6,70	S1-A15.1-257
3,07	0,15	7,30	S1-A15.1-307

STEEL KICK PLATE

Product Description
The kick plate completes the three-part side guard foreseen.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	0,15	2,75	S12648-073
1,09	0,15	3,75	S12648-109
1,40	0,15	4,65	S12648-140
1,57	0,15	4,75	S12648-157
2,07	0,15	5,55	S12648-207
2,57	0,15	6,95	S12648-257
3,07	0,15	7,55	S12648-307

ALUMINUM KICK PLATE

Product Description
The kick plate completes the three-part side guard foreseen.

Length (m)	Width (m)	Weight (Kg)	Product Code
0,73	0,15	1,20	S12648-073
1,09	0,15	1,40	S12648-109
1,40	0,15	1,50	S12648-140
1,57	0,15	1,60	S12648-157
2,07	0,15	2,60	S12648-207
2,57	0,15	3,60	S12648-257
3,07	0,15	4,60	S12648-307

Platforms

STEEL PLATFORM

Product Description Galvanized by hot dipping method. Thanks to its drilled structure, it prevents slipping and can be well stacked, with integrated lifting safety.

Load Class	Length (m)	Width (m)	Weight (Kg)	Product Code
6	0,73	0,19	5,10	S1-G8-019/073
6	1,00	0,19	5,70	S1-G8-019/100
6	1,09	0,19	6,30	S1-G8-019/109
6	1,57	0,19	8,50	S1-G8-019/157
6	2,07	0,19	10,50	S1-G8-019/207
6	2,50	0,19	12,50	S1-G8-019/250
5	2,57	0,19	13,10	S1-G8-019/257
4	3,07	0,19	15,20	S1-G8-019/307
6	0,73	0,32	7,20	S1-G8-019/073
6	1,00	0,32	12,00	S1-G8-019/100
6	1,09	0,32	12,20	S1-G8-019/109
6	1,57	0,32	14,00	S1-G8-019/157
6	2,07	0,32	15,80	S1-G8-019/207
6	2,50	0,32	18,00	S1-G8-019/250
5	2,57	0,32	18,20	S1-G8-019/257
4	3,07	0,32	20,00	S1-G8-019/307

ALUMINUM PLATFORM

Product Description Produced with special molds. Prevents slipping; well stackable with integrated lifting safety.

Load Class	Length (m)	Width (m)	Weight (Kg)	Product Code
6	0,73	0,19	2,60	S1-A8-019/073
6	1,09	0,19	3,90	S1-A8-019/109
6	1,40	0,19	5,00	S1-A8-019/140
6	1,57	0,19	5,60	S1-A8-019/157
6	2,07	0,19	7,20	S1-A8-019/207
6	2,57	0,19	8,70	S1-A8-019/257
4	3,07	0,19	10,20	S1-A8-019/307
6	0,73	0,60	5,80	S4-A8-060/073/15
6	1,09	0,60	8,00	S4-A8-060/073/15
6	1,40	0,60	9,80	S4-A8-060/140/15
6	1,57	0,60	10,90	S4-A8-060/157/15
6	2,07	0,60	14,00	S4-A8-060/207/15
5	2,57	0,60	17,40	S4-A8-060/257/15
4	3,07	0,60	19,80	S4-A8-060/307/15

ALUMINUM PLATFORM WITH LADDER

Product Description Produced with special molds. Prevents slipping; well stackable with integrated lifting safety, facilitates access between floors.

Load Class	Length (m)	Width (m)	Weight (Kg)	Product Code
5	1,57	0,60	16,50	S4-A16-157
5	2,07	0,60	20,30	S4-A16-207
4	2,57	0,60	25,20	S4-A16-257
4	3,07	0,60	29,80	S4-A16-307

English